KFAM 201815Z AUTO 10004KT 10SM FEW050 27/16 A3008
I didn't fly for four weeks. I went on vacation (over two weekends) and then I had to wait for the installation of the new oil temp gauge.
I was skeptical that it was a gauge issue. My mechanic assured me that there has been a lot of discussion within the A&P community that if a pilot reports an oil temp issue and the gauge is original, to suspect the gauge. The new gauge was checked prior to installation and then installed. It's reading a good 15-20 degrees lower than the original.
The original gauge worked for 65 years or so. They don't make them like that anymore.
Did a $100 breakfast flight on Saturday down to the Skyways Cafe at KDXE. Then yesterday, I shot some landings on the grass runway. They mowed enough grass that it's almost a landing mat. When I taxi from the grass to the paved runway, I pay a lot of attention to where the runway lights are to avoid hitting one. A little paranoia is a good thing.